SPL Phonitor xe
SPL Phonitor xe
₹239,850

  • SPL Phonitor xe

  • SPL Phonitor xe

SPL Phonitor xe
Sound Performance Lab

SPL Phonitor xe

Product Code:
Availability:
SPL Phonitor xe
Call for Availability
₹239,850

Call +91 98843 04425 for availability

Analog inputs & outputs; XLR (balanced)
Maximum input & output gain
21.5 dBu
Input impedance
20 kΩ
Output impedance
75 Ω
Frequency range (-3 dB)
10 Hz – 100 kHz
THD +N (0 dBu, 10 Hz – 22 kHz))
0.005 %
Noise (A-weighted)
-96 dBu
Crosstalk (1 kHz)
-70 dB
Common mode rejection (1 kHz)
60 dB
Dynamic range
117 dB

Standard Headphones Output, 6.35 mm (1/4") TRS Jack
Wiring
Spitze = links, Ring = rechts, Schaft = GND
Source impedance
22 Ω
Noise (A-weighted, 600 Ω)
-85 dBu

Internal Linear Power Supply with Toroidal Transformer
Operating voltage for analog audio
+/- 15 V
Operating voltage for relays and LEDs
+ 12 V

Mains Power Supply
Mains voltage (selectable)
230 V AC / 50; 115 V AC / 60 Hz
Fuse for 230 V
T 315 mA
Fuse for 115 V
T 630 mA
Power consumption
max. 10 W

Dimensions & Weight
W x H x D (width x height incl. feet x depth)
215 x 100 x 220 mm
8.46 x 3.58 x 8.66 inch
Unit weight
2.1 kg
4.63 lbs
Shipping weight (incl. packaging)
4 kg
8.82 lbs

    Phonitor xe
    Our nonplusultra headphone amplifier.
    The Phonitor xe is the non plus ultra standalone headphone amplifier without any compromises. Phonitor Matrix, remote volume control, retro-look VU meter, the optional premium DA converter and the all-superior VOLTAiR technology make the Phonitor xe one of the best headphone amplifiers of our time.

    Great Sound –
    for all headphones
    The Phonitor xe offers connections for a standard headphone with a stereo jack plug and for balanced-driven headphones using a 4 pin XLR plug.

    Thanks to the enormous output power, all headphones are driven effortlessly.
    Thus, it plays out the advantages of the SPL VOLTAiR technology and rewards the listener with an honest, detailed and at the same time vivid sound experience.

    Twice as nice
    The Phonitor xe provides headphone outputs on the front and on the rear. On the front, you switch between F (front) and R (rear). This way, your favorite headphones remain firmly connected on the rear – without visible cabling on the front.

    Milled from solid
    The massive 45mm volume control knob milled from aluminum is a haptic highlight. Its mass together with the motorized Alps RK27 “Big Blue” potentiometer enhances the “spoon in the honey” feeling even further. The red marker LED ensures good visibility of the volume parameter even in darkened environments.

    Remote control
    The volume control can be remotely controlled with any infrared remote control. The Phonitor xe learns to communicate with it with the simple push of a button.

    Learning made easy
    Using Phonitor x as an example, this video explains how you can use any infrared remote control to remotely control the volume.

    Source of joy
    Up to six (6 !) stereo sources can be connected to the Phonitor xe:
    XLR, RCA and via the optional DAC768v2 also USB, COAX, OPTICAL and AES.
    Phonitor xe accepts almost all audio connections. Balanced via XLR or unbalanced via RCA connectors.

    The highly acclaimed AKM AK4493 SEQ VELVETSOUNDTM premium DAC chip is used as the converter chip in the digital/analog converter within the latest version of the SPL DAC “DAC768v2”, which thanks to its architecture reproduces the finest sound details. It impresses with even lower distortion characteristics and a wider dynamic range than its predecessor.

    It converts PCM audio with a resolution of 32 bits and a sampling rate of up to 768 kHz, which is equivalent to 16 times CD resolution. Direct Stream Digital is also supported up to a resolution of DSD4 or DSD256. The DAC768v2 features the newest version of the Spartan FPGA – Spartan 7.
    In contrast to the smaller SPL DAC “DAC768xs”, it not only offers an AES/EBU digital input, but also the new, optimized SPL SLP120 with VOLTAiR technology.

    DAC768v2 – what's new:
    1. AK 4493 SEQ
    The DAC768v2 is equipped with the latest generation of the premium DAC chip – the AK 4493 SEQ – from  Asahi Kasei (previously AK 4490).
    The AK 4493 SEQ impresses with even lower distortion characteristics and a wider dynamic range than its predecessor.

     2. Spartan 7
    The DAC768v2 features the newest version of the Spartan FPGA – Spartan 7 (previously Spartan 6).


    3. The newest generation of the SPL low-pass filter “SLP120”
    The DAC768v2 comes with a completely new tuned low-pass filter, which perfectly matches the sonic strengths of the new converter chip. It offers an even better representation of the stereo image as well as a three-dimensionality we nhave ever experienced from any other DAC before.

    SPL Audio Professional Fidelity

    Reviews (0)

       0 reviews
    Write a review