SPL Phonitor x + DAC768xs
SPL Phonitor x + DAC768xs
₹299,705

  • SPL Phonitor x + DAC768xs

  • SPL Phonitor x + DAC768xs

  • SPL Phonitor x + DAC768xs

SPL Phonitor x + DAC768xs
Sound Performance Lab

SPL Phonitor x + DAC768xs

Product Code:
Availability:
SPL Phonitor x + DAC768xs
Call for Availability
₹299,705

Call +91 98843 04425 for availability

Analog inputs & outputs; XLR (balanced)
Maximum input & output gain
21.5 dBu
Input impedance
20 kΩ
Output impedance
75 Ω
Frequency range (-3 dB)
10 Hz – 100 kHz
THD +N (0 dBu, 10 Hz – 22 kHz))
0.005 %
Noise (A-weighted)
-96 dBu
Crosstalk (1 kHz)
-70 dB
Common mode rejection (1 kHz)
60 dB
Dynamic range
117 dB

Standard Headphones Output, 6.35 mm (1/4") TRS Jack
Wiring
Spitze = links, Ring = rechts, Schaft = GND
Source impedance
22 Ω
Noise (A-weighted, 600 Ω)
-85 dBu

Internal Linear Power Supply with Toroidal Transformer
Operating voltage for analog audio
+/- 15 V
Operating voltage for relays and LEDs
+ 12 V

Mains Power Supply
Mains voltage (selectable)
230 V AC / 50; 115 V AC / 60 Hz
Fuse for 230 V
T 315 mA
Fuse for 115 V
T 630 mA
Power consumption
max. 10 W

Dimensions & Weight
W x H x D (width x height incl. feet x depth)
215 x 100 x 220 mm
8.46 x 3.58 x 8.66 inch
Unit weight
2.1 kg
4.63 lbs
Shipping weight (incl. packaging)
4 kg
8.82 lbs

    SPL Phonitor X : The Headphone Amplifier with Preamplifier
    With the better VOLTAiR technology, you may enjoy music as well through headphones or speakers, which is why we created Phonitor X.

    For every headphone
    The Phonitor X connects regular headphones via a jack plug and balanced headphones via a 4-pin XLR connector.

    All headphones are easily powered by a huge output power of 18 watts.

    Headphones or speakers
    The OUTPUT switch converts the headphone amplifier into a preamplifier; just switch from headphones to speakers, and the selected source signal is routed to both analog audio outputs (RCA and XLR).

    In the center position (mute), no signal reaches the outputs. The VU meters glow up red.

    To power amplifiers
    You may connect the active loudspeakers using the balanced XLR- for long wire lengths and the RCA sockets for short cable connections.

    The AMP CTL sockets allow power amplifiers with 12V trigger inputs to be switched on and off alongside Phonitor X.

    Milled from solid.
    Has a large 45mm volume control. Its bulk, along with the motorized Alps RK27 “Big Blue” potentiometer, heightens the “spoon in the honey” sensation even more.

    The red marker LED makes the setting apparent even in low-light conditions.

    Volume RC
    The volume may be adjusted with any infrared remote control, which the Phonitor X readily learns.
    To achieve this, first push the IR programming button, followed by the louder and quieter buttons.

    Learning made easy.
    This video demonstrates how to use any infrared remote control to adjust the volume.

    The DAC768xs
    The highly acclaimed AKM AK4490 Velvet Sound™ premium DAC chip is used as the converter chip in the optional digital-to-analog converter, which thanks to its new architecture reproduces the finest sound details.

    It converts PCM audio with a resolution of 32 bits and a sampling rate of up to 768kHz, which is equivalent to 16 times CD resolution. Direct Stream Digital is also supported up to a resolution of DSD4 or DSD256.

    The Revolution
    in the headphone amplifier is the Phonitor Matrix, thanks to which you can listen to music through headphones as if you were listening through speakers. The tiring super stereo effect is a thing of the past.


    SPL Audio Professional Fidelity

    Reviews (0)

       0 reviews
    Write a review