64x64 all-in-one interface, 32x32 Dante I/ORed 16Line is a 64-in/64-out Pro Tools | HD and dual Thunderbolt 3 audio interface with ultra-low latency A-D/D-A conversion, Red Evolution mic preamps, up to 121dB dynamic range, ultra-low round trip latency, and expansion over Ethernet for networked audio. Since Red 16Line provides both DigiLink™ connectors and Thunderbolt connections, it's now easier t..
8x8 analogue I/ORedNet 1 connects to your Dante™ audio-over-IP network with a single Ethernet cable. It's remotely controlled via the network and can be placed anywhere in your facility. It offers eight channels of line-level analogue in and out, with Focusrite's precision 24-bit A-D and D-A conversion for superb audio performance, and 119dB dynamic range at sample rates up to 192kHz. The rear pan..
32x32 ADAT I/O with 8x8 AES3 I/ORedNet 3 interfaces your existing digital audio systems and components to any Dante™ audio-over-IP network, with up to 32 inputs and outputs and full software remote control. The unit includes support for AES3, S/PDIF and ADAT digital audio formats and allows the network to be synchronised to incoming signal clock or a word clock source.Total of 32 channels of ADAT ..
32x32 Pro Tools | HD I/ORedNet 5 is a 2U 32x32 Pro Tools | HD™ interface for any Dante™ audio-over-IP network, providing 32x32 I/O (16x16 at 192kHz). A pair of DigiLink connectors allows RedNet 5 to connect to any Pro Tools | HD system whether it's Native, HDX or even a legacy TDM system. Multiple RedNet 5 units can be on the same system to realise the the maximum channel count of Pro Tools, while..
64x64 MADI I/ORedNet 6 is a 1U, 64x64 MADI interface for any Dante™ audio-over-IP network. MADI connectivity is provided in the form of coax through two rear-panel BNC connectors, as well as optical through an SC-Duplex connector. Word Clock I/O allows RedNet 6 to provide clock to external equipment, or alternatively to sync the Dante network to an external clock. The word clock input can addition..
Stereo headphone and line output, PoE suppliedRedNet AM2 is a compact, Power-over-Ethernet (PoE) -supplied stereo analogue output device for any Dante audio-over-IP network. Featuring a powerful headphone amp, capable of driving both high and low impedance headphones, RedNet AM2 is the ideal signal monitoring device to add extra functionality to your audio network.A pair of rear-panel XLR outputs ..
64x64 MADI I/O with dual PSUsRedNet D64R is a 1U, 64x64 MADI interface for any Dante™ audio-over-IP network. Featuring network and power supply redundancy, RedNet D64R is the ideal choice for providing MADI I/O in many critical-path applications, whether in Post Production, Broadcast, Live Sound or the Recording Studio.MADI connectivity is provided in the form of coax through two rear-panel BNC co..
8-channel remote-controlled mic pre with dual PSUsRedNet MP8R is a 1U, eight-channel remote-controlled mic pre and A-D interface for any Dante™ audio-over-IP network. Featuring network and power supply redundancy, RedNet MP8R is the ideal choice for providing mic pres in many critical-path applications, whether in Post Production, Broadcast, Live Sound or the Recording Studio.RedNet MP8R was desig..
128x128 PC and Mac I/OFor situations in which low-latency performance is critical, such as tracking, the RedNet PCIe card provides the best possible performance for your system. This dedicated card fits into a Windows or Mac computer with a standard PCIe card slot and delivers up to 128 channels I/O with under 3ms latency*. A standard RJ45 Gigabit Ethernet connector links your audio computer to th..
2x2 analogue I/O with 2x mic pres, headphone and line output, PoE suppliedRedNet X2P is a compact, portable and robust 2x2 Dante™ audio interface featuring two Red Evolution mic pres, stereo line out and a stereo headphone amplifier. RedNet X2P allows you to effortless add a high quality Dante audio interface by integrating power, audio, clock and remote control over a single Ethernet cable – simp..