- Studio & Recording
- Audio Interfaces
- Studio Monitors
- Headphone Amplifiers
- MIDI Keyboards
- MIDI Controllers
- Control Surfaces
- ADAT Expanders
- Cat 5 Snake & Breakout Box
- Signal Processing
- Studio Furniture
- Acoustic Treatment
- Preamps & Channel Strips
- 500 Series
- Cable Management
- Live Sound
- Room Acoustics
- Software & Plug-ins
- Keyboards & Synthesizers
- Drums & Percussion
- DJ Equipment
|Capsule Size (V34C) ||1.34″ / 34mm (dual-capsule)|
|Diaphragm Size (V34C)||1.04″ / 26.4mm|
|Capsule Diaphragms Thickness (v34C)||3µm|
|Capsule Size (Small-Diaphragm)||0.87″/22mm|
|Diaphragm Size (Small-Diaphragm)||0.78″ / 16mm|
|Capsule Diaphragm Thickness (Small-Diaphragm)||4µm|
|Electronics Type||Solid-state, transformer-balanced output|
|Max SPL||136dBA (0.5% THD @ 1000Hz)|
|Equivalent Noise Level||<15dBA|
|Output Connector||Male XLR 3-pin, gold-plated|
|Finish||Polished nickel trim / High-gloss Pinot Noir|
|Voltage Requirement||Phantom Power (+48V ideal)|
Stereo Multi-Capsule Pencil Condenser Kit
The Vanguard V1S+LOLLI is a multi-capsule pencil condenser microphone system. Ten matched custom capsules – large and small, with 6 potential pickup patterns – allow for a cornucopia of tonal variations for virtually any sound source.
With premium cryo-treated FET componentry, an unparalleled selection of capsules, and a true heavy-duty shockmount, the V1S+LOLLI is your new “go-to” microphone pair for stereo recording, whether you’re in the studio or the field.
Two Vanguard V1 Microphones – packed with high-end componentry including an ultra-quality precision-biased JFET, a custom-wound transformer, premium capacitors, and cryogenic treatment throughout. A “straight-wire” design philosophy means there’s only four components between the capsule and the output.
Eight 22mm Capsules – these interchangeable capsules give you unmatched flexibility – two each of cardioid, wide cardioid, hypercardioid, and omnidirectional patterns. Ultra-sensitive 4-micron diaphragms, an anti-comb-filtering front design, and precision-machined backplates give wide consistency across each capsule.
Two V34C “LOLLI” Removable Multi-Pattern Large-Diaphragm Capsule Heads – our patent-pending interchangeable large-diaphragm multi-pattern head. Our custom-voiced
34mm edge-terminated 3-micron diaphragm dual-capsule assembly housed in a precision-machined aircraft-grade aluminum body. Switchable between omni and cardioid…and aesthetically gorgeous to boot.
Two VSSM Shockmounts – the best pencil shockmount in the ‘verse. Heavy-duty cast zinc partners with high-impact ABS to create a shockmount that stays where it’s supposed to. Aerospace-grade suspension rings keep the rumble out (no hair scrunchies here!), and a windowed design allows you to easily access switches without changing the your mic placement.
Stereo Microphone Bar – Easily set up X/Y, ORTF, or other stereo mic’ing configurations.
Pinewood Storage Case – because your microphones should stay safe in luxury. We’ve carved individual capsule pockets into a block of solid pine, and custom-cut foam for your mics to stay cozy and secure…whether they’re on the road or in your studio.
We designed the V1S+LOLLI with the character and versatility of iconic pencil condensers in mind, while also utilizing modern technology & design to meet the demands of today’s recording professionals.
The V1S+LOLLI kit was created to be the most flexible and adaptable microphone kit in your locker. Eight small capsules (2 of each pattern) allow tonal variety on any number of sources, but we found them to be exceptionally well-suited for close-to-medium-range mic’ing of acoustic guitar, percussion, piano, and stringed instruments. (The wide cardioid capsule in particular deserves special mention here as our favorite, but each capsule has sources and situations in which it excels.)
A pair of (PATENT-PENDING) V34C “LOLLI” capsules add another level to your toolkit by coupling the smooth, lush sound of our custom-voiced V13 capsule with the precision and detail of the V1 microphone. The LOLLI excels in almost any recording situation, with vocals being of particular note.
After hundreds of hours of listening and testing exhaustive design variations with world-class engineers, we can confidently say that this microphone will exceed the performance of other pencil condenser microphones in its price range, and rival or exceed the performance of microphones costing several times more.
Capsule & Electronics
- Eight small-diaphragm 22mm capsules – cardioid, hypercardioid, omnidirectional, wide cardioid (pairs)
- Two Large-diaphragm V34C “Lolli” multi-pattern capsule assembly – switchable between cardioid & omni
- Transformer-balanced solid-state circuit with premium-grade over-spec circuitry
- Low-noise ultra-grade hand-biased JFET and other premium components
- Deep-cycle cryogenic treatment of critical signal & power path components
- Transformer-balanced output – custom-wound humbucking dual-bobbin transformer
- Works via 48V phantom power
- Heavy-duty brass, steel, and zinc construction
- Each V1 microphone comes with its own laser-engraved serial number
- Over-spec componentry
- Deep-gloss Pinot Noir finish
- Polished nickel trim
- Precision-cast Vanguard badge
- Final Assembly & 100% Quality Control in California, USA
- 5-Year Warranty
- 22mm removable capsule – Cardioid (pair)
- 22mm removable capsule – Hypercardioid (pair)
- 22mm removable capsule – Omnidirectional (pair)
- 22mm removable capsule – Wide Cardioid (pair)
- V34C “Lolli” removable multi-pattern capsule assembly (pair)
- VSSM small shockmount (pair)
- Padded pinewood microphone storage box
- Stereo microphone bar