SPL Audio Crimson 3 - Audio Interface, Monitor Controller, Talkback, & Phonitor Matrix
SPL Audio Crimson 3 - Audio Interface, Monitor Controller, Talkback, & Phonitor Matrix
₹103,585

SPL Audio Crimson 3 - Audio Interface, Monitor Controller, Talkback, & Phonitor Matrix

   0 reviews
Product Code:
Availability:
SPL Audio Crimson 3
Call for Availability
₹103,585

Call 044-2819 3607 for availability

Analog inputs & outputs; XLR (balanced)
Maximum input & output gain
21.5 dBu
Input impedance
20 kΩ
Output impedance
75 Ω
Frequency range (-3 dB)
10 Hz – 100 kHz
THD +N (0 dBu, 10 Hz – 22 kHz))
0.005 %
Noise (A-weighted)
-96 dBu
Crosstalk (1 kHz)
-70 dB
Common mode rejection (1 kHz)
60 dB
Dynamic range
117 dB

Standard Headphones Output, 6.35 mm (1/4") TRS Jack
Wiring
Spitze = links, Ring = rechts, Schaft = GND
Source impedance
22 Ω
Noise (A-weighted, 600 Ω)
-85 dBu

Internal Linear Power Supply with Toroidal Transformer
Operating voltage for analog audio
+/- 15 V
Operating voltage for relays and LEDs
+ 12 V

Mains Power Supply
Mains voltage (selectable)
230 V AC / 50; 115 V AC / 60 Hz
Fuse for 230 V
T 315 mA
Fuse for 115 V
T 630 mA
Power consumption
max. 10 W

Dimensions & Weight
W x H x D (width x height incl. feet x depth)
215 x 100 x 220 mm
8.46 x 3.58 x 8.66 inch
Unit weight
2.1 kg
4.63 lbs
Shipping weight (incl. packaging)
4 kg
8.82 lbs
Crimson, speakers, headphones, DAW. Ready is the recording studio.


Two Mic Preamps
2 microphone preamplifiers in discrete technology
separate switchable phantom power for condenser microphones
High-pass filter to remove footstep sound and rumble before recording

Two Instrument Preamps
High impedance (Hi-Z) instrument jacks on front side

Talkback
Electret microphone with omnidirectional characteristic
Gain control on the front side

Channel & State LEDs
Traffic light LEDs for the analog inputs
Power (PWR)
Host – Mac/PC, iDevice, Tablet etc. detected
Midi In traffic LED

Analog Monitoring
Inputs & DAW
Monitoring the analog mic/line inputs 1/2 with mono switching
Monitoring the analog instrument/line inputs 3/4
Monitoring the digital workstation inputs 1/2 & 3/4
Source& Digital In
Monitoring the three analog sources or feeds
Monitoring a digital source
Selection for digital input channels 1/2 & 3/4
Speakers | Artist Mode | Talk
Toggling the speaker pairs and the dim function
Activating the Artist Mode and Talk switch
Crossfeed
Adjusting the crossfeed when Phonitor Matrix is activated



Headphone Volume 1 & 2
Independent volume control for two headphones
Monitor Mix
Creation of a monitoring mix between the analog inputs and the analog & digital sources/DAW
Phonitor Matrix
Enables correct mixing on headphones
Removes the super stereo effect
Calculates the interaural levels and time differences
Volume
Control for the loudspeaker monitoring volume

The Revolution
in the headphone amplifier is the Phonitor Matrix, with adjustable crossfeed, thanks to which you can create mixes with headphones that sound the same on speakers.
The Phonitor Matrix in its largest expansion stage has three setting parameters: Crossfeed, Speaker Angle and Center Level. 
In the Crimson 3, the center level is preset to -1 dB and the speaker angle to 30°. These are the most commonly used values.
The crossfeed function determines the crosstalk of the channels, the so-called interaural level difference. The intensity of the crossfeed is fully variable. 

Reviews (0)

   0 reviews
Write a review